Whole-Home Standby Generator Sizing Tool
Add your critical appliances and get a recommended generator size, so you don't buy too small and get stranded, or too large and overpay.
Size your whole-home generator
Check each appliance you want the generator to power. Watt values are typical, adjust if you know your actual figures.
The gauge updates as you check appliances above.
How to use this calculator
Check every appliance you want to run during a power outage. The tool sums running watts and surge watts, then adds a 25% safety buffer to recommend a minimum generator size. The recommended kW is the size you should look for when shopping standby units.
Tips for success
- Always size for surge (starting) watts, not just running watts, motors draw 2–3× more on startup.
- Add a 20–25% safety buffer on top of your peak load to avoid overloading the generator.
- A 14–20 kW unit covers most 2,000–3,000 sq ft homes without electric heat.
- Homes with electric heat, EV chargers, or hot tubs typically need 22–28 kW or more.
- Consult a licensed electrician before purchasing, local code and transfer switch requirements matter.
This tool provides an estimate only. Motor surge ratings vary by brand and age. Get a professional load calculation before purchasing a standby unit.
Running watts vs. surge watts
- Running watts are what an appliance needs to keep operating continuously.
- Surge watts (also called starting watts) are the brief spike when a motor starts, often 2–3× the running load.
- Your generator must handle the highest surge demand you'll ever place on it at once.
- Never run a generator at 100% of its rated capacity continuously, keep loads under 80% for longevity.
FAQ
What size generator do I need for a 2,000 sq ft house?
A typical 2,000 sq ft home with central A/C, a refrigerator, lights, and basic electronics needs a 14–20 kW standby generator. Homes with electric heat, a well pump, or an electric dryer often need 20–22 kW.
Can I use a portable generator for whole-home backup?
Portable generators max out around 7–12 kW, which is enough for partial-home backup (lights, fridge, a few outlets) but rarely sufficient for central A/C and major appliances simultaneously. A standby generator is the better choice for whole-home coverage.
Do I need a transfer switch?
Yes, always. A transfer switch prevents back-feeding power onto the utility lines, which can electrocute line workers. Most jurisdictions require it by code. Automatic transfer switches start the generator for you when power fails.
What fuel does a whole-home generator use?
Most standby units run on natural gas or propane, making them more convenient than portable generators that require stored gasoline. Natural gas is the most common choice for homes with gas service.
How long can a standby generator run continuously?
Most propane/natural gas standby generators can run for several days to weeks as long as fuel supply is maintained. Oil changes are needed every 100–200 hours of operation. Follow the manufacturer's maintenance schedule.