Household Printable

Pressure Washer Maintenance Log

A printable log for pressure-washer maintenance with sections for both gas and electric models. Machine snapshot at top, 12-month monthly checks grid, event-based maintenance log, spring start-up and fall shutdown checklists, and a quick reference card with intervals and Canadian retailer notes. Black-and-white printer friendly.

Pair with the Pressure Washer Cleaning Time Calculator for job estimates, the gas vs electric pressure washer guide for the maintenance-cadence comparison, and the Home Maintenance Log printable for the broader household schedule.

Frequently Asked Questions

How often should I change the oil in a gas pressure washer?

Every 50 hours of run-time, or once per season for a typical residential user (15 to 25 hours per year). Use SAE 30 or 10W-30 synthetic OPE oil; the engine takes about 16 to 24 oz (475 to 700 mL) per change. Cost USD 8 to 12 / CAD 12 to 16 per quart at Canadian Tire, Home Hardware, or Princess Auto. The first oil change on a new machine is the most important; the engine break-in releases metal shavings that the first 5 hours of run accumulate.

What is pump saver and when do I use it?

Pump saver is a glycol-based protective fluid that coats internal pump seals and prevents dry-running damage and freezing. Use it between cleaning sessions (especially if you draw water from a rain barrel or pond with sediment) and always before storage. Application: disconnect water supply, attach the pump saver bottle to the inlet, pull the trigger until fluid comes out the outlet, store the machine. About 1 to 2 oz (30 to 60 mL) per application. Cost USD 10 to 15 / CAD 14 to 20 per quart at Canadian Tire or Princess Auto.

Why winterize a gas pressure washer?

Two reasons: ethanol fuel left in the carburetor over winter gums up the jets (the most common spring-failure mode on residential gas pressure washers), and water left in the pump can freeze and crack the pump housing. Two winterization options: (1) add fuel stabilizer (Sta-Bil, STP) to the tank, run the engine 2 to 3 minutes to circulate, store; or (2) run the tank completely dry until the engine dies. Either is fine; never skip both. After fuel handling, pump-saver flush and store indoors above freezing if possible.

Where do I buy parts and consumables in Canada?

Canadian Tire stocks filters, oil, pump saver, spark plugs, and detergent for the common residential brands (Simoniz, Greenworks, Sun Joe, Karcher, Ryobi). Princess Auto leans toward hoses, wands, quick-connects, and commercial-grade replacement parts. Home Hardware handles general consumables. For specific brand parts (Generac, Briggs & Stratton, Honda engines), the brand websites and Canadian Tire often carry common replacement kits. Costco Canada sells full machines (Generac, Powerstroke) but rarely individual parts.