Deadbolt Grade Guide: ANSI Grade 1, 2, and 3 Explained
What ANSI grades actually measure, which grade belongs on your front door, and how strike plates, smart locks, and rekeying fit into the picture.
Quick summary
1. What ANSI grades actually measure
ANSI/BHMA A156.36 is the American standard for bored locks. It is a lab test, not a marketing label. A lock that claims a grade must pass all three of these performance categories at that grade level.
- Operational cycles: How many times the lock can be operated before it fails. Grade 1 must survive 250,000 cycles, Grade 2 must survive 150,000, Grade 3 must survive 100,000. For context, a typical front door sees 10 to 20 cycles per day.
- Security strength: Resistance to physical attack. This includes a bolt impact test (how many hammer strikes the bolt withstands), a torque test on the key cylinder, and a forced entry test. Grade 1 must resist 10 strikes of 75 ft-lbs, Grade 2 must resist 5 strikes of 75 ft-lbs, Grade 3 must resist 2 strikes.
- Finish durability: Corrosion and wear resistance. Grade 1 finishes must survive 200 hours of salt spray, Grade 2 must survive 72 hours, Grade 3 must survive 12 hours. Matters for coastal homes.
2. Grade 1, Grade 2, Grade 3 at a glance
- Grade 1 (commercial): Built for high-traffic doors in offices, schools, and apartment entries. Longest lifespan, strongest bolt, thickest cylinder. Costs $120 to $300 per lock. Overkill for a typical home but worthwhile on the front door of a high-traffic rental or a house with children who slam doors.
- Grade 2 (residential heavy-duty): The right choice for any exterior door on a single-family home. Rated for the volume of household use, resists common forced-entry attempts, and typically runs $40 to $120 per lock. Most name-brand deadbolts from Schlage, Kwikset Signature Series, Baldwin, and Yale meet Grade 2.
- Grade 3 (residential standard): The minimum residential grade. Fine on interior doors, bedroom locks, and low-risk applications. Not strong enough for exterior doors. Costs $15 to $40 and is often what comes stock with cheap builder-grade hardware.
3. What most exterior doors actually have
Walk your house and look at the brand and model on each exterior deadbolt. If it does not say "ANSI Grade 1" or "ANSI Grade 2" on the box, the packaging, or the manufacturer's product page, treat it as Grade 3 or unrated and plan to replace it.
4. The deadbolt is only half the job
A Grade 1 deadbolt in a splintered door frame is weaker than a Grade 3 deadbolt in a reinforced one. The frame, strike plate, and door material matter at least as much as the lock grade.
- Reinforced strike plate: A box-style or wrap-around strike plate with 3-inch screws driven into the stud transforms the weakest part of the door assembly. Costs about $10 to $20 per door.
- 3-inch screws, not the factory 3/4-inch ones: Builder-supplied strike plates use short screws that anchor only the thin door jamb. A single kick often pops the jamb. Long screws anchor into the framing stud behind the jamb and multiply the kick resistance.
- Solid-core or metal-clad door: Hollow-core exterior doors can be punched through in seconds. If your door sounds hollow when you rap it with your knuckles, it is. Replace with a solid-core wood, steel, or fiberglass door.
- Double-cylinder deadbolts with glass nearby: If there is breakable glass within 36 inches of the deadbolt thumbturn, consider a double-cylinder lock (key on both sides) so an intruder cannot break the glass and reach in. Check local fire code first. Some jurisdictions require egress-friendly single-cylinder locks on bedrooms and primary exits.
5. Smart locks and ANSI grades
A good smart lock is rated on the same ANSI scale. The electronics are layered on top of the mechanical lock underneath, so a smart lock is only as strong as its underlying deadbolt.
- Look for the ANSI grade in the product specs. Reputable smart locks from August, Schlage, Yale, and Level publish their BHMA grade. If the listing does not mention it, assume Grade 3 or lower.
- Grade 2 is fine for smart locks on exterior doors. Grade 1 smart locks exist but are rare and expensive. Grade 2 is the practical sweet spot.
- Check battery backup and offline behavior. A smart lock that fails to a locked state when batteries die is safer than one that fails unlocked or needs a key override you have not used in two years.
- Pick a brand with security-audited firmware. Several cheap Bluetooth smart locks have had well-documented cryptographic vulnerabilities. Stick with major brands that publish firmware updates and have independent security reviews.
6. Rekey versus replace
Rekeying changes which key opens the lock. Replacing installs a new lock. Which one you need depends on why you are changing the lock.
- Rekey when: You moved into a home someone else lived in, a keyholder has left your household, you lost a key you cannot account for, or you want every exterior door to open with the same key. Rekeying is $15 to $25 per lock if you do it yourself with a kit like Kwikset SmartKey or Schlage Secure Key, $50 to $150 per lock for a locksmith.
- Replace when: The existing lock is Grade 3 or unrated, the bolt or cylinder is worn or rusted, the finish has failed, or you want to upgrade to a smart lock. Replacement is the right time to upgrade the grade.
- Rekey all exterior doors to a single key. Carrying one key for every door makes travel easier and reduces the "which key is which" hesitation at your own front door after dark.
7. What to buy and what to skip
- Worth the money: Any ANSI Grade 2 deadbolt from a major brand, a box strike plate with 3-inch screws, and a solid-core door slab if you are replacing a hollow one. Combined cost per door: $60 to $140.
- Good upgrades: A smart lock with Grade 2 rating and battery backup, a video doorbell to cover the front entry, and a keyed-alike set so one key fits every exterior door.
- Skip: Builder-grade combo packs labeled only "residential," cheap smart locks with no published ANSI rating, and decorative deadbolts that sacrifice grade for appearance on exterior doors.
8. Putting it together
The practical rule for a typical home: ANSI Grade 2 deadbolt on every exterior door, reinforced strike plate with 3-inch screws, solid-core door slab, and keyed alike. Add a smart lock on the primary entry if you want remote access and audit logs. Audit your hardware once a year using the Home Security Score Calculator and the full home security audit walkthrough, and update the printable checklist when anything changes.
Simple takeaway
Grade 1 is commercial, Grade 2 is what most homes should use, and Grade 3 is for interior doors only. The deadbolt grade does not matter if the strike plate is held by 3/4-inch screws, so upgrade both at the same time. One afternoon and about $150 per exterior door will move a typical home from "builder-grade default" to "properly hardened front entry."
Use these together
Frequently asked questions
What is the best deadbolt grade for a house?
ANSI Grade 2 is the right choice for exterior doors on a single-family home. It is rated for residential use, resists common forced-entry attempts, and costs about $40 to $120. Grade 1 is commercial-grade and overkill for most homes. Grade 3 is not strong enough for exterior doors.
Is a Grade 1 deadbolt worth the extra cost?
Usually no for a single-family home. Grade 2 passes all forced-entry tests at residential volume and costs much less. Grade 1 is worth it on a high-traffic rental front door, a shared apartment entry, a commercial property, or a home in a high-crime area where you want the extra margin.
How do I know what grade my current deadbolt is?
Check the product packaging, the manufacturer's website, or look for a small "ANSI Grade X" stamp on the lock body itself. If there is no grade stamped or published, assume it is Grade 3 or unrated. Builder-grade locks in new construction are almost always Grade 3.
Do I need to replace the strike plate too?
Yes. A reinforced box-style strike plate with 3-inch screws is one of the highest-return security upgrades you can make, and it typically costs $10 to $20 per door. The factory strike plate and 3/4-inch screws supplied in most homes are the weakest part of the lock assembly and the reason kicked-in doors are the most common forced entry.
Are smart locks less secure than traditional deadbolts?
Not if you pick a smart lock with an ANSI Grade 2 rating from a reputable brand. The electronics sit on top of a mechanical deadbolt, and the mechanical grade is what resists forced entry. Where smart locks go wrong is with cheap brands that cut mechanical corners or ship firmware with security flaws.
Can I install a Grade 2 deadbolt myself?
Yes for most exterior doors. If the door was drilled for a standard 2-1/8 inch bore hole and 2-3/8 or 2-3/4 inch backset, a replacement deadbolt drops in with a screwdriver in about 10 minutes per door. If you need to add a new bore hole or re-mortise a strike plate, plan for about 30 to 45 minutes with a hole saw kit.
Does a double-cylinder deadbolt make sense?
Only if you have breakable glass within 36 inches of the deadbolt and local fire code allows it. A double-cylinder deadbolt needs a key on both sides, which stops an intruder from breaking glass and reaching in, but it also slows down emergency exit. Many jurisdictions ban them on primary egress doors for this reason, so check code before installing.