Printable Worksheet

Security Camera Placement Worksheet

Plan a camera install on paper before you drill holes: a property sketch grid, an 8-camera planning log, a coverage-zone checklist, a cable-run planner, and an annual maintenance log.

Frequently Asked Questions

How do I plan a home security camera install on paper?

Start by sketching your property outline and marking every door, window, fence, and gate. Number the priority zones from the entry-point hierarchy (front door, ground-floor windows, garage side door, back-yard approaches). Assign a camera to each priority zone, note its mount height, lens field of view, power source, and storage destination, then plan the cable runs before drilling any holes. The Security Camera Coverage Calculator sizes the camera count, and the positioning guide covers placement detail.

What mounting height should I write on the worksheet?

Plan most cameras at 8 to 10 ft (2.4 to 3.0 m), angled 30 to 45 degrees down, so they stay above tampering range while still capturing recognizable faces. Reserve heights above 12 ft (3.7 m) for wide context views rather than identification.

Do I need to consider privacy law when placing cameras?

Yes. Aim cameras at your own property, disable two-way audio at the property line, and post signage if you record audio. In Canada, provincial Privacy Acts in British Columbia, Alberta, and Quebec (Law 25) are strictest and PIPEDA applies to any home-business use. The Canadian privacy compliance checklist on this worksheet walks through the key points.