Device & Vision Tester

Color Blindness Test

Quick Ishihara-style screening across 8 plates. Each plate hides a number in colored dots, pick what you see, then review your summary at the end.

Plate 1 of 8

What number do you see in the dots? Pick the closest match. If you see nothing, choose Nothing.

Plate 1 of 8, pick the number you see

How to use this test

Sit at arm's length from a clean, color-accurate display in normal indoor lighting. Avoid running this test on a screen with night-mode or a strong color filter active. Each plate shows a circle of colored dots. Pick the number you see (or "Nothing"), and the test advances. After all 8 plates, you'll see a summary with a per-plate breakdown.

What the plates screen for

  • Plate 1 (control): high-contrast number visible to everyone with reasonable acuity. Useful as a baseline.
  • Plates 2-7 (red-green): dot pairs that confuse protan (red-weak) and deutan (green-weak) viewers. Red-green deficiency covers ~99% of color blindness cases.
  • Plate 8 (blue-yellow): tritan-axis dots. Tritan deficiency is rare (under 1 in 30,000) and shows up as confusion between blue/yellow rather than red/green.

Tips for success

  • Use a color-calibrated display. Cheap monitors and phones with aggressive color filters can produce false positives. A calibrated IPS monitor or a recent iPhone/iPad in standard mode is closest to the original printed plates.
  • Disable night mode. Warm-color filters reduce blue light and shift the entire palette, that breaks the dot color contrast the test relies on.
  • Take it in good light, not at midnight. Low ambient light causes the eye to rely more on rods (which are color-blind), leading to artificially poor results.
  • Don't squint or stare. Glance at the plate for 3-5 seconds and answer with your first impression. Long staring blends colors and can confuse normal-vision viewers too.
  • If you wear corrective lenses, keep them on. Color vision tests assume normal acuity. Blurry plates produce ambiguous answers.

What your result means

  • 0-1 errors: No deficiency indicated. Color vision is in the normal range for screening purposes.
  • 2-3 errors, mostly red-green: Possible mild red-green deficiency (protan or deutan). Worth a clinical follow-up if you do color-critical work.
  • 4+ errors, mostly red-green: Likely red-green color vision deficiency. An optometrist can confirm type and severity.
  • Errors on the blue-yellow plate: Possible tritan-type deficiency, which is rare and worth ruling out a non-inherited cause (medication, optic nerve, retinal disease).

Common mistakes

  • Testing on a phone in dim light. The OLED panel auto-shifts colors at low brightness. Run the test at 70%+ brightness in a well-lit room.
  • Trusting an online screening alone. A clinical Ishihara plate set, Farnsworth D-15 hue arrangement, and an optometrist's exam together give the real diagnosis. Online tests flag, they don't confirm.
  • Assuming a clean result rules out everything. The 8-plate screen catches the common red-green types and tritan, but mild anomalies and acquired (rather than inherited) deficiencies need a more comprehensive battery.

Practical note

Color vision deficiency is fixed at birth in 99% of cases, there's no progression and no treatment. The value of finding out is occupational and adaptive: knowing your type lets you pick wardrobe and presentations that work, and lets you pre-empt conflicts (electrical wire color codes, traffic-signal recognition, lab color-change tests). Several modern apps re-color photos and screens to be deficiency-friendly, and EnChroma-style glasses shift wavelengths enough to recover some discrimination for many protan and deutan viewers.

FAQ

How accurate is an online color blindness test?

An online Ishihara-style screening test is accurate enough to flag a likely color vision deficiency, but it cannot diagnose the type or severity. Display color calibration, ambient lighting, and screen quality all affect the result. A clinical evaluation with calibrated test plates and a hue-arrangement test (Farnsworth D-15 or FM 100-Hue) gives the definitive answer.

What does the test screen for?

The eight plates screen for the three common forms of color vision deficiency: protan (red-weak), deutan (green-weak), and tritan (blue-yellow-weak). Most plates use red-green dot pairs because red-green deficiency accounts for about 99 percent of color blindness cases. One blue-yellow plate flags the rare tritan type.

How common is color blindness?

Roughly 1 in 12 men (8 percent) and 1 in 200 women (0.5 percent) have some form of red-green color vision deficiency. The trait is X-linked recessive, which is why men are affected far more often. Tritan-type blue-yellow deficiency affects fewer than 1 in 30,000 people regardless of sex.

Can color blindness be corrected?

There is no cure for inherited color vision deficiency. Tinted contact lenses and special-purpose glasses (EnChroma, ColorMax) shift wavelengths to make some colors easier to distinguish, but they do not restore full normal vision. Acquired color blindness from medications or eye disease may be reversible if the underlying cause is treated.

Should I see a doctor based on this result?

Yes if the test flags a likely deficiency and you have not been diagnosed before, especially if your work involves color-critical tasks (electrician, pilot, designer, lab technician). Sudden onset of color vision changes in adulthood warrants prompt evaluation since it can signal optic nerve, retinal, or medication-related issues. An optometrist or ophthalmologist can run calibrated diagnostic plates and confirm type and severity.